Benewake TF03-100/180 alternatives

Reference module. Benewake TF03-100/180 (rangefinder module): 905 nm, max range 180 m (TF03-180: 180 m @ 90% ref.; TF03-100: 100 m @ 90% ref. (70 m / 40 m @ 10%)), interface UART/CAN/RS-485/RS-232, 86 g. Source.

Below are the 15 catalogued modules whose published maximum range is between 0.5× and 2.5× of the Benewake TF03-100/180, ordered by how close they are in range, then weight, interface and wavelength class (no manufacturer is ranked by preference). None of them is a drop-in replacement unless the protocol, connector, supply voltage and mounting match; check the linked datasheet. Ranges are quoted by each maker under its own target condition, so compare the condition column too.

BrandModelnmMax rangeRange conditionMin mAccuracyRateInterfaceWeight gUSD (1 pc)Open-source driverSourceCompared with reference
BenewakeTF03-100/180905180 mTF03-180: 180 m @ 90% ref.; TF03-100: 100 m @ 90% ref. (70 m / 40 m @ 10%)0.1±10 cm (<10 m); 1% (≥10 m)1 ~ 9800 HzUART, CAN, RS-232, RS-48586ArduPilot AP_RangeFindersource 2026-11-17range ×1; weight ×1; shared interface: CAN/RS-232/RS-485/UART
JRTETYS-HF-2905150 m>=150 m (conventional natural large targets)0.1<=0.1m (0.1-2m); 5%×L (>2m)20Hz-10KHzRS422/TTL (baud 19200-921600 bps)45565source 2026-11-17range ×0.83; weight ×0.52; shared interface: UART
LightWareSF30/D905200 m70% reflectivity0.239 to 20 000 readings per secondUSB, Serial UART and I2C (3.3 V TTL, 5 V tolerant)30459source 2026-11-06range ×1.1; weight ×0.35; shared interface: UART
ERDILRF200H905200 m0.05–200 m (90% reflectivity); 0.05–70 m (10% reflectivity) (The two source values remain bound to their stated target reflectivity.)0.05±10 cm (<10 m); 1% (≥10 m)20 Hz-10 kHz (default: 1 kHz)UART, IIC20250erdi-lrf-drivers (Python, ROS 2), ErdiLRF (Arduino)source 2026-11-12range ×1.1; weight ×0.23; shared interface: UART
BenewakeTFA300905270 m90% reflectivity, 100 KLux (150 m @ 30%, 90 m @ 10%, same conditions)0.1±10 cm (<10 m); 1% (≥10 m)1-10,000 Hz configurable (default 50 Hz)UART, CAN (switchable by command)34.5source 2026-11-17range ×1.5; weight ×0.4; shared interface: CAN/UART
BenewakeTFA170-L170 m0.11 ~ 1000 HzRS-23210source 2026-11-06range ×0.94; weight ×0.12; shared interface: RS-232
LightWareSF30/C905100 m70% reflectivity0.239 to 20 000 readings per secondUSB, Serial UART (3.3 V TTL, 5 V tolerant)30349source 2026-11-06range ×0.56; weight ×0.35; shared interface: UART
ERDILRF300H905300 m0.05–300 m (90% reflectivity); 0.05–100 m (10% reflectivity) (The two source values remain bound to their stated target reflectivity.)0.05±10 cm (<10 m); 1% (≥10 m)1 kHz or 50 Hz (automatically switched to match reflected-signal intensity)UART, IIC20280erdi-lrf-drivers (Python, ROS 2), ErdiLRF (Arduino)source 2026-11-12range ×1.7; weight ×0.23; shared interface: UART
BenewakeTF350905350 mindoor, no ambient light, 90% reflectivity (outdoor @100Klux: 300 m @90%)0.2±10 cm (within 10 m); 1% (10 m and further)1 ~ 1000 HzUART, CAN, RS-232, RS-485224ArduPilot AP_RangeFindersource 2026-11-17range ×1.9; weight ×2.6; shared interface: CAN/RS-232/RS-485/UART
LightWareGRF-250905250 mat 50 Hz update rate, 40% albedo, 10 km visibility, 1.4 m x 1.4 m target size0.2± 50 cm (1 sigma)1 to 50 readings per secondUSB, Serial UART and I2C (3.3 V TTL, 5 V tolerant)10.7399grf250-api (GitHub, LightWare, MIT), ArduPilot AP_RangeFindersource 2026-11-06range ×1.4; weight ×0.12; shared interface: UART
ERDILRF100H905100 m0.05–100 m (90% reflectivity); 0.05–30 m (10% reflectivity) (The two source values remain bound to their stated target reflectivity.)0.05±10 cm (<10 m); 1% (≥10 m)20 Hz-10 kHz (default: 1 kHz)UART, IIC20200erdi-lrf-drivers (Python, ROS 2), ErdiLRF (Arduino)source 2026-11-12range ×0.56; weight ×0.23; shared interface: UART
LightWareLW20/C905100 m70% reflectivity0.248 to 5 000 readings per secondSerial UART and I2C (3.3 V TTL, 5 V tolerant)19.5349LW20-Api (GitHub, LightWare-Optoelectronics), ArduPilot AP_RangeFindersource 2026-11-06range ×0.56; weight ×0.23; shared interface: UART
BenewakeTFA300-L905290 m90% reflectivity, 100 KLux (170 m @ 30%, 100 m @ 10%, same conditions)0.1±10 cm (<10 m); 1% (≥10 m)1-10,000 Hz configurable (default 50 Hz)UART, CAN (switchable by command)10.5source 2026-11-17range ×1.6; weight ×0.12; shared interface: CAN/UART
LightWareLW20/HA100 m70% reflectivity0.2Better than 1cm over 100m48 to 1 250 readings per secondSerial UART and I2C (3.3 V TTL, 5 V tolerant)19.5389LW20-Api (GitHub, LightWare-Optoelectronics), ArduPilot AP_RangeFindersource 2026-11-17range ×0.56; weight ×0.23; shared interface: UART
LightWareSF20/C905100 m70% reflectivity0.248 to 5 000 readings per secondUSB, Serial UART and I2C (3.3 V TTL, 5 V tolerant)7.5319LW20-Api (GitHub, LightWare-Optoelectronics), ArduPilot AP_RangeFindersource 2026-11-06range ×0.56; weight ×0.087; shared interface: UART
LightWareSF20/HA100 m70% reflectivity0.2Better than 1cm over 100m48 to 1 250 readings per secondUSB, Serial UART and I2C (3.3 V TTL, 5 V tolerant)7.5359LW20-Api (GitHub, LightWare-Optoelectronics), ArduPilot AP_RangeFindersource 2026-11-17range ×0.56; weight ×0.087; shared interface: UART

Missing a module? Add it in a pull request with the manufacturer source link.